Power Industry Induction Card
- Course Code
- Course Type
- Short Course
- Unit Code
- Construction and Safety Centre
- Course Location
- Course Duration
Part Time: 1 session/8 hours or
1 session/2 hours for holders of current Red Card/CI Card
If enrolling in a two hour course participants MUST produce their current Red Card/CI Card on the day of training to be eligible to attend the shorter session.
- Course Cost
- $235 for 8 hrs, $75 for 2 hrs.
- Study Modes
- On Campus; On Site; Part Time (Day)
Contact the Short Course Hotline to enrol or express your interest in this course.
Phone: 1300 657 261
Fax: 1300 094 661
The Power Industry Induction Card Course (PIIC) was developed by GippsTAFE in consultation with Latrobe Valley Generators, and is a requirement for employment for, or on-site, for the following local providers:.
- Loy Yang Power
- Tru Energy Power
- International Power/Mitsui Loy Yang B
- Energy Brix Australia
- International Power Hazelwood
- Ecogen Jeeralang
The aim is to provide an OHS course that covers Power Station specific procedures and processes and safety issues as well as generic OHS requirements.
The objectives of the Power Industry Induction Card are:
- To create common health and safety standards and knowledge across the power generation industry, particularly the mobile workforce of today
- To ensure individuals that work in the power generation industry remain updated on occupational health and safety requirements
- To ensure new employees into the power generation industry are aware of industry specific hazards, risks and methods of risk management
8 Hour Course
The PIIC is delivered over an eight (8) hour period and is structured to cover generic OHS information and Power Station specific information. Successful completion of the course will enable the participant to also apply for a Worksafe issued Construction Induction Card through GippsTAFE.
2 Hour Course
If you already hold a Construction Induction Card or Red Card then you can be exempted from attending the eight hour course and will only need to attend a two hour Power Station specific course but you must produce proof of holding a Construction Induction Card or Red Card upon presenting for the course.
Qualifications And RecognitionUpon completion of this course students will receive a Statement of Participation.
Recognition of Prior Learning (RPL)
Pre-RequisitesIf enrolling in a two hour session participants must present their current Construction Induction Card.
Power Industry Induction Card including Construction Induction Card (8 hour session)
|Yallourn||8.00am-4.00pm||22 October 2013
|Yallourn||8.00am-4.00pm||26 November 2013
|Yallourn||8.00am-4.00pm||18 February 2014
|Yallourn||8.00am-4.00pm||18 March 2014
|Yallourn||8.00am-4.00pm||15 April 2014
|Yallourn||8.00am-4.00pm||13 May 2014
|Yallourn||8.00am-4.00pm||10 June 2014
|Yallourn||8.00am-4.00pm||8 July 2014
|Yallourn||8.00am-4.00pm||5 August 2014
|Yallourn||8.00am-4.00pm||2 September 2014
|Yallourn||8.00am-4.00pm||30 September 2014
|Yallourn||8.00am-4.00pm||28 October 2014
|Yallourn||8.00am-4.00pm||25 November 2014
Power Industry Induction Card
|Yallourn||8.00am-11.00am||12 November 2013
|Yallourn||8.00am-11.00am||4 February 2014
|Yallourn||8.00am-11.00am||1 April 2014||PIC, 1/4/14|
|Yallourn||8.00am-11.00am||29 April 2014||PIC, 29/4/14|
|Yallourn||8.00am-11.00am||27 May 2014||PIC, 27/5/14|
|Yallourn||8.00am-11.00am||24 June 2014||PIC, 24/6/14|
|Yallourn||8.00am-11.00am||22 July 2014||PIC, 22/7/14|
|Yallourn||8.00am-11.00am||19 August 2014||PIC, 19/8/14|
|Yallourn||8.00am-11.00am||16 September 2014||PIC. 16/9/14|
|Yallourn||8.00am-11.00am||14 October 2014||PIC. 14/10/14|
|Yallourn||8.00am-11.00am||11 November 2014||PIC. 11/11/14|